Compact constant temperature controllers ACD20

ACD compact controllers are designed to control a constant temperature in the pipeline. The controller is set using a keypad and a graphic display, which is also used to show measured temperatures and other data. An integrated motor drive is used to control the mixing valve. The controller shall be connected to the power supply by means of a prewired cable with plug.

Read > Why is the heating controller an important part of the heating system?

Use

  • Temperature control of the return water to the boiler or other energy source.
  • Constant temperature control of the inlet to the heating or cooling system.

Capabilities

  • 3 preset hydraulic schemes.
  • Display of temperatures and other operating data.
  • Heating or cooling mode.
  • Overview of temperature trends over the last week.
  • Display of notifications and warnings about the operation of the heating system.
  • Control and signalling of the circulator.
  • Additional sensor to measure the temperature of the source.
  • Setting and signalling the direction of rotation of the mixing valve.
  • Setting the control sensitivity (PID).
  • Can be mounted on different types of mixing valves.
  • Click-to-install system.
  • Automatic screen orientation.


Technical data ACD20
TFT display Yes
Keyboard Yes
Own consumption Maximum 3,5 W
Standby power consumption Maximum 0,25 W
Torque 6 Nm
Angle of rotation 90 < °
Rotation speed 2 min 90 < °
Control of the mixing valve 3-point PID
Circulation pump control 2-point (ON/OFF)
Control output electronic relay, 1 (1) A ~, 250 V~
Connection voltage 230 V ~, 50 Hz
Maximum own consumption 5 W
Clock power supply Battery CR1025 (Li-Mn) 3 V
Watch accuracy +/-1 s (24 h) at 20 °C
Degree of protection IP42 after 60529
Safety class I according to EN 60730-1
Type of temperature sensors Pt1000
Housing material PC - dark grey
Operating temperature 0÷50 °C
Storage temperature -20÷65 °C
Product weight 1.000 g
Number of pieces per packing unit 12 pieces
Dimensions
Electrical connection
Lead Form Test
Step 1 of 5

WANT ADVICE OR A QUOTE?

Here you can ask questions about heating and cooling products or make an enquiry for your project. If you already have technical documents, plans or additional information about your project, you will be able to add them in later steps.

NOTICE

Dear customers!

3. 5. 2025 will be a shop, service and warehouse closed.

Thank you for your understanding.