Use
- regulating the radiator space heating system,
- regulating the underfloor heating or cooling system,
- regulating a convector heating or cooling system,
- regulating a wall or ceiling heating or cooling system,
- heating domestic water.
Weather compensated controller WXD10B
The WXD heating controllers are installed in standard 144 x 96 mm housings. They are designed to regulate space heating or cooling and domestic hot water heating in detached houses. They allow the control of one or two heating circuits, switching between heat sources and return protection when the storage tank is filled. They are used for heating systems with one or two boilers, a heat pump, a heat storage tank and a solar system.
| COMPARING THE PERFORMANCE OF CONTROLLERS | WXD10B | WXD10 | WXD20 |
|---|---|---|---|
| USE | |||
| Controlling a radiator space heating system | Yes | Yes | Yes |
| Controlling the underfloor heating or cooling system | Yes | Yes | Yes |
| Controlling a convector heating or cooling system | Yes | Yes | Yes |
| Controlling a wall or ceiling heating or cooling system | Yes | Yes | Yes |
| Heating of sanitary water | Yes | Yes | Yes |
| TECHNICAL CHARACTERISTICS | |||
| Number of preset hydraulic schemes | 7 | 17 | 52 |
| Number of room units | 2 | 2 | 2 |
| Number of mechanical relays | 7 | 8 | 9 |
| Number of electronic relays | No | 1 | 1 |
| Number of inputs for temperature sensors | 8 | 8 | 8 |
| Number of analogue outputs (0÷10 V or PWM) for circulator or power source control | 2 | 2 | 2 |
| BUS-connectivity of WXD controllers to each other and to other Seltron controllers | Yes | Yes | Yes |
| REGULATING SYSTEMS | |||
| Controlling the heating system with radiators | Yes | Yes | Yes |
| Controlling the underfloor heating or cooling system | Yes | Yes | Yes |
| Controlling a convector heating or cooling system | Yes | Yes | Yes |
| Controlling a wall or ceiling heating or cooling system | Yes | Yes | Yes |
| Regulating the domestic hot water heating system | Yes | Yes | Yes |
| REGULATING HEATING CIRCUITS | |||
| Direct Circle | Yes | Yes | Yes |
| Mixing Circle | Yes | Yes | Yes |
| Direct and mixing circuits | Yes | Yes | Yes |
| Two mixing circuits | No | Yes | Yes |
| Domestic water heating | Yes | Yes | Yes |
| Switching between direct heating circuit and domestic water heating | Yes | Yes | Yes |
| Circulation of sanitary water | Yes | Yes | Yes |
| Automatic switching between heat sources | No | No | Yes |
| Control of the riser temperature constant | Yes | Yes | Yes |
| One-step filling of the storage tank | No | No | Yes |
| REGULATING HEAT SOURCES | |||
| Solid fuel boiler | Yes | Yes | Yes |
| Solid fuel boiler with pellet burner | No | No | Yes |
| Liquid fuel boiler | Yes | Yes | Yes |
| Liquid fuel boiler with two-stage burner | Yes | Yes | Yes |
| Combined boiler | No | No | Yes |
| Gas-flow boiler | No | No | Yes |
| Heat pump | No | No | Yes |
| The repository | Yes | Yes | Yes |
| Heating with electricity | Yes | Yes | Yes |
| Solar collectors | No | Yes | Yes |
| HEATING OF DOMESTIC WATER | |||
| With a primary heating source | Yes | Yes | Yes |
| With heat storage | Yes | Yes | Yes |
| With a solar system | No | Yes | Yes |
| USER FUNCTIONS | |||
| Space heating or cooling according to a timed programme | Yes | Yes | Yes |
| Automatic winter/summer switchover | Yes | Yes | Yes |
| The PARTY function – simple extension of comfort heating | Yes | Yes | Yes |
| ECO function – activating energy-saving mode | Yes | Yes | Yes |
| HOLIDAY function – activating holiday mode | Yes | Yes | Yes |
| Heating of domestic water according to a timed programme | Yes | Yes | Yes |
| One-off – immediate hot water heating | Yes | Yes | Yes |
| BOOST function for intensive space heating | Yes | Yes | Yes |
| Screed drying function | Yes | Yes | Yes |
| HEATING SYSTEM PROTECTION | |||
| Legionella protection (for regulated energy source) | Yes | Yes | Yes |
| Overheating protection for the storage tank | Yes | Yes | Yes |
| Boiler overheating protection | Yes | Yes | Yes |
| Protection against freezing of collectors | No | Yes | Yes |
| Forced pump switch-on at maximum collector temperature | No | Yes | Yes |
| Switching off the collectors when the safety temperature is exceeded | No | Yes | Yes |
| Protecting the solar system when the collectors overheat | No | Yes | Yes |
| Protecting the solar system when the collectors overheat | No | Yes | Yes |
| Reverse cooling of the storage tank to the desired temperature | No | Yes | Yes |
| Periodic start-up of pumps and mixing valves during inactive periods | Yes | Yes | Yes |
| DISPLAY OF DATA | |||
| Graphical display of temperatures by day for the last week | Yes | Yes | Yes |
| Detailed display of temperatures for the current day | Yes | Yes | Yes |
| Notifications of activated safety functions and system fault warnings | Yes | Yes | Yes |
| Possibility to simulate sensors and analyse system performance | Yes | Yes | Yes |
| REMOTE ACCESS | |||
| USB connection to PC | Yes | Yes | Yes |
| Connectivity to the SeltronHome platform, allowing remote control via smartphone or tablet | Yes | Yes | Yes |
| SET-UP AND INSTALLATION | |||
| Wizard for easy and fast device start-up | Yes | Yes | Yes |
| 13 language user interface Languages: EN, DE, FR, NL, PL, ES, SL, IT, CS, LT, GR, HU, HR |
Yes | Yes | Yes |
| Setting the operation by selecting the hydraulic scheme | Yes | Yes | Yes |
| The “Help” button for quick settings assistance | Yes | Yes | Yes |
| Graphically configurable time programmes | Yes | Yes | Yes |
| Possibility to simulate system operation | Yes | Yes | Yes |
| Logging and displaying changes to settings | Yes | Yes | Yes |
| Ability to retrieve basic settings in case of loss or unwanted changes | Yes | Yes | Yes |
| Possibility to programme free outputs | Yes | Yes | Yes |
| Wall or cut-out mounting | Yes | Yes | Yes |
| Easy installation and connection | Yes | Yes | Yes |
Key features of the WDX10B controller
- 7 preset hydraulic schemes,
- they can be used to regulate new heating systems or to replace existing regulators,
- heating or cooling rooms according to a timed programme,
- heating domestic water according to a timetable,
- regulating storage heating systems,
- 2 bedroom units can be connected,
- BOOST function for intensive space heating,
- 13 language user interface,
- a wizard to start your device quickly and easily,
- the ability to simulate sensors and analyse system performance,
- remote monitoring using SeltronHome.
| TECHNICAL DATA | WXD10B |
|---|---|
| Illuminated graphic display | Yes |
| Operating hours counter | Yes |
| Weekly programme hour | Yes |
| Connection voltage | 230 V ~ , 50 Hz |
| Own consumption | 2,5 W |
| Standby power consumption | Maximum 0,5 W |
| Number of entrances | 8 x temperature sensor (Pt 1000) |
| Number of outputs | 7 x mechanical 1 x analogno 0÷10 V (Y2) |
| Relay outputs | 4 (1) A ~, 230 V ~ |
| Triac output | 1 (1) A ~, 230 V ~ |
| Clock power supply | Battery CR2032 (Li-Mn) 3 V |
| Time display accuracy | +/- 1 s (24 h) at 20 °C |
| Degree of protection | IP20 to EN 60529 |
| Safety class | I according to EN 60730-1 |
| Type of operation | 1B to EN 60730-1 |
| Type of temperature sensors | Pt1000 or KTY10 |
| Type of operation | 3-point PID |
| Housing material | ASA + PC thermoplastic |
| Permissible ambient temperature | 5 ÷ 40 °C |
| Storage temperature | -20°C to +65°C |
| Product weight | 430 g |
| Number of pieces per packing unit | 6 pieces |
| Dimensions (W × H × D): 144 x 96 x 48 mm | 
|
| Electrical connection | 
|
